Free tool/Runs in your browser
Data size, speed and download time converter
This converter translates between decimal units (kB, MB, GB, TB), binary units (KiB, MiB, GiB, TiB) and bits, converts connection speeds such as Mbps to MB/s by dividing by 8, and estimates download time from a file size and a speed.
How to use it
- Size: enter a number, choose its unit, and read the same amount in every other unit.
- Speed: enter a connection speed in Mbps, Gbps, MB/s or similar to see the equivalents.
- Download time: enter a file size, a speed and an overhead percentage to estimate how long the transfer takes.
The formulas
| Conversion | Formula |
|---|---|
| Bits to bytes | bytes = bits ÷ 8 |
| Decimal prefixes | k = 10^3, M = 10^6, G = 10^9, T = 10^12 |
| Binary prefixes | Ki = 2^10, Mi = 2^20, Gi = 2^30, Ti = 2^40 |
| Download time | seconds = (size in bits) ÷ (speed in bits per second × (1 − overhead)) |
Example: a 50 GB game on a 300 Mbps line with 6% overhead is 400,000,000,000 bits ÷ 282,000,000 bits per second, about 1,418 seconds, or 23 minutes and 38 seconds.
Limits
Advertised speeds are maximums. Server limits, Wi-Fi conditions and other devices on your network often matter more than your plan speed. For the background, read Mbps vs MB/s explained and NVMe vs SATA SSDs.
Privacy
All math happens in this page. Nothing you enter is sent anywhere.
Frequently asked questions
How do I convert Mbps to MB/s?
Divide by 8, because a byte is 8 bits. A 100 Mbps connection moves at most 12.5 MB/s, and real downloads land a few percent lower because of protocol overhead.
Why does a 1 TB drive show about 931 GB?
Drive makers use decimal terabytes (1,000,000,000,000 bytes). Windows divides by 1,073,741,824 (a binary gibibyte) but labels the result GB, so 1 TB appears as about 931 GB.
What overhead should I use?
For a wired connection, 5 to 7 percent is a reasonable allowance for TCP/IP and Ethernet framing. Wi-Fi, VPNs and busy servers can cost much more, so treat the estimate as a best case.
Is a kilobyte 1,000 or 1,024 bytes?
Under SI and IEC conventions a kilobyte (kB) is 1,000 bytes and a kibibyte (KiB) is 1,024 bytes. Some software still uses KB to mean 1,024 bytes, which is where the confusion comes from.